Chef Knives / Mac MTH-80 Professional Hollow Edge Chef Knife

Mac MTH-80 Professional Hollow Edge Chef Knife

4.7 / 5 • Güncelleme Tarihi September 2026
Chef Knives

Temsili görsel (stok fotoğraf); ürünün kendisi değildir.

Japanese Blade, Western Comfort

The MTH-80 occupies a genuinely useful middle ground. It is made in Japan with harder steel and a thinner blade than German knives, so it is sharper and cuts more cleanly, while the handle and the general handling remain familiar to anyone used to Western knives.

That combination is why it wins so many comparative tests. It delivers most of the cutting advantage of a Japanese gyuto without the steeper learning curve, the delicate single-bevel geometry or the reactive carbon steel some traditional knives use.

At around eight inches it is a conventional chef knife length, and the profile has enough curve for rocking cuts as well as a flat enough section for push cutting, which suits both Western and Japanese technique.

Thinness And What It Buys

The blade is noticeably thinner behind the edge than a German knife, and that single measurement determines more about how a knife cuts than sharpness does.

A thin blade separates food rather than wedging it apart, which means a potato falls away cleanly instead of cracking, and a tomato is sliced rather than crushed. On dense produce the difference against a thicker knife is immediate and obvious.

The hollow-edge dimples are intended to reduce sticking. They help modestly with things like potato slices and they are not the main reason the knife performs — the geometry is.

Harder Steel And Its Demands

The steel is harder than German stainless, which means it holds a sharper edge for longer. It also means it is less tolerant of abuse: prying, twisting, cutting against a hard surface or hitting bone can chip it in a way a Wüsthof would shrug off.

It requires a wooden or plastic board, not glass, stone or ceramic, and it should not be put in a dishwasher. These are not fussy preferences — a hard thin edge is genuinely damaged by those things.

Sharpening takes a little more effort than soft steel and holds the result longer, which for most cooks is the better trade. A whetstone is the right tool; pull-through sharpeners will ruin the edge geometry.

Against The Alternatives

Against a Wüsthof Classic, the Mac is thinner, sharper and cuts more cleanly, and less tough and less forgiving of misuse.

Against a Victorinox, it is in a different class for cutting and costs several times as much, and needs more careful handling.

Against a traditional single-bevel Japanese knife, the Mac is double-bevelled and vastly more practical for general Western cooking.

Who Should Not Buy It

Anyone who uses a glass or stone board should not buy any hard thin knife until that changes, since the board will destroy the edge.

Anyone who puts knives in a dishwasher should stay with softer, cheaper steel.

Anyone who uses a chef knife for jointing, prying or anything involving bone should keep a tougher German knife for that work.

The Verdict

Arguably the best all-round chef knife available: Japanese thinness and hardness with Western handling, and it cuts noticeably better than German knives at similar money.

It demands a proper board, hand washing and reasonable technique, and it will chip if abused.

The board matters as much as the knife — if yours is glass or stone, fix that before buying this.

Bir bakışta

Artılar

  • Thin behind the edge, so it separates food rather than wedging
  • Harder steel holds a sharper edge for longer
  • Western handling with Japanese cutting performance
  • Profile suits both rocking and push cutting

Eksiler

  • Chips if used for prying, twisting or bone work
  • Requires a wooden or plastic board, never glass or stone
  • Not dishwasher tolerant
  • Pull-through sharpeners will ruin the edge geometry

Sıkça sorulan sorular

Why does thinness matter more than sharpness?

Because a thin blade separates food rather than wedging it apart. A very sharp but thick knife still cracks a potato and crushes a tomato; a thin one parts them cleanly. Geometry determines how a cut feels more than the edge does.

Will it chip?

If you pry, twist, hit bone or cut against a hard surface, yes — harder steel trades toughness for edge retention. Used on a wooden board for normal cutting it is entirely reliable, and a tougher German knife is worth keeping for rough work.

Can I use my pull-through sharpener?

No. Pull-through sharpeners impose their own edge angle and tear at hard steel, ruining the geometry you paid for. A whetstone is the correct tool, and learning to use one is a genuinely worthwhile skill for any good knife.

Teknik Özellikler

OriginJapan
Blade lengthAround 8 inches
GeometryThin behind the edge, double bevel
SteelHarder than German stainless
EdgeHollow-edge dimples
Board requiredWood or plastic
DishwasherNo
SharpeningWhetstone

Özet

Probably the best all-round chef knife: Japanese thinness and hardness with Western handling. Needs a wooden board, hand washing and a whetstone.

Amazon'da Fiyatı Kontrol Et